top of page

6inchx12mm

6inchx12mm

Thick Solid Zinc Polishing Lap boasts an advantage over some other tin Laps as it avoids the common issue of developing an orange peel surface. It features a 1/2" arbor hole. Tin and its alloys belong to a class of materials with recrystallization temperatures below room temperature. This characteristic prevents them from work hardening at room temperature, a crucial factor when embedding diamonds into a lapping plate. Because the lapping material doesn't work harden during the charging process, it allows diamonds to embed effectively. The challenge with many low recrystallization metals and alloys is that they struggle to securely hold diamonds. However, Tin TAC-3000 and tin-antimony lapping plate tackle this issue by maintaining a tightly controlled grain structure. Consequently, the embedded diamonds are pinned at the grain boundaries, preventing smearing and rolling. This results in a fixed diamond lapping process that offers lower cutting profiles, more efficient cutting (with energy applied to cutting rather than rolling), less wear on the lapping plates, and a finish reminiscent of a polished surface.

For professional cutters, the Solid Zinc Polishing Lap has long been the lap of choice. It surpasses tin in hardness and excels at rapidly producing flat facets on even the hardest of colored stones. Moreover, Solid Zinc Polishing Lap can achieve a good polish on a wide range of stones, from hard to soft. Additionally, these full-thickness Solid Zinc Polishing Lap are robust enough to serve as standalone laps without the need for bonding to a base plate or require a master lap base. They can even be re-machined if necessary. These Lap are particularly preferred for Polishing tougher gems like corundum and cubic zirconia.

The Perfect Solid Zinc Polishing Lap are meticulously crafted using top-quality industrial-grade Zinc. This ensures dimensional accuracy and corrosion resistance. These Laps are especially ideal for polishing facet-grade soft stones.

The new Solid Zinc Polishing Lap needs to add water and use 60-80# sandpaper, polish from the outer edge to the inside, until no scratches are seen, and then polish it with 240# sandpaper, and the same processing procedure after the old disc is repaired. The polishing powder should be moistened with diamond oil to form a paste, and continue polishing on 50-150# sandpaper. The disc needs to maintain a certain humidity. The polishing powder should be applied evenly and polished until the surface is black, then it can be used.

How to Buy

Request an Equipment  Quote
Ready to buy stuff from Flexible,Request a quote now.
Become a Delare
Becoming a Flexbile Authorized Dealer
Shop
Browse Parts and equpments on our store
Solution
Flexbile solutions to help you tackle any challenge

Reviews

コメント

Share Your ThoughtsBe the first to write a comment.

FAQ

What is the company Diamond Tool?

Diamond Tool is a full line contractor supply house. With a 20,000 square foot showroom, in-house repair department, large rental equipment fleet, knowledgeable inside and outside sales staff, and emphasis on safety service solutions, Diamond Tool brings something unique to contractors everyday.

How do you electroplate diamond tools?

In the diamond electroplating process, the tool body (negatively charged) is placed in a tank where the diamond grit (positive charge) is “tacked” to the exposed surface. Nickel is then electroplated to strengthen the hold of the diamond grit to the body.

How are diamond coated tools made?

Plated diamond tools: These tools are made by fixing the diamonds onto the tool's base via electroplating method or via CVD (Chemical Vapor Deposition) method. They can usually be made to good processing precision. Ceramic-bonded diamond tools: The tools' bonding material is usually glass and ceramic powder.

What are the benefits of diamond tools?

Tools that use diamonds have higher wear resistance, higher grinding efficiency, and a longer lifespan. Diamond saws and drills will help ensure a high-quality cut for concrete projects, and will reduce time and effort. Synthetic diamonds are a regular fixture in the construction industry.

What are electroplated diamond tools?

Electroplated diamond tools have a monolayer of abrasive coating on a metal substrate. The individual diamond grits are bonded through an electroplated nickel layer. They project well out of the bond so that very open, easy cutting tools with exceptionally large chip spaces are created.

What kinds of processes require the use of diamond tools?

1. Geological Exploration and Mining. Diamond cutting tools are used in the oil/gas industry for drilling and mining bits. ... 2. Construction. ... 3. Stone Processing Applications. ... 4. IT and Home Appliances. ... 5. Engineering Ceramics Applications.

Diamond Abrasive Products
Diamond Abrasive Products
bottom of page